Victory Reach-In Manuale di Servizio Scaricare il pdf (Pagina 73)

Section 7 Diagnostics

7-5

REFRIGERATOR SENSING BULB

LOCATION

All reach-in refrigerators must have the

sensing bulb installed in the evaporator coil,

regardless of the original thermostat bulb

location. Failure to do so will cause the

evaporator coil to frost up.

Angle the cap tube as you insert the sensing

bulb. Insert the sensing bulb exactly 6” into

the evaporator coil. When replacing a

thermostat, be sure to seal the hole in the top

of the cabinet through which the sensing bulb

is inserted.

FREEZER SENSING BULB

LOCATION

All reach-in freezers must have the cap tube

mounted without coils or kinks, to sense the

air temperature entering the evaporator coil.

Figure 7-1: Sensing Bulb Location

EVAPORATOR

DETAIL “A”

CAP TUBE

FINS

CAP TUBE SHOULD NOT TOUCH

EVAPORATOR TUBING

NOTE: PINCH FINS AROUND

CAP TUBE AND RTV AROUND

OUTER EDGE OF CAP TUBE

CAP TUBE

FINS

DETAIL “B”

12 3/4” (RS3)

7 1/2” (RS2)

5 3/4” (RS1)

SV1425

8” (R1, 2, 3/RS1, 2, 3)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

Nessun commento

Victory Reach-In Manuale di Servizio Pagina 73