Victory Reach-In Manuale di Servizio Scaricare il pdf (Pagina 74)

Section 7Diagnostics

7-6

Light/Fan Switch(es)

FUNCTION for refrigerators (R1, R2, R3,

RS1, RS2, RS3, RR1, RR2, RR3)

Turns the interior cabinet light on as the

reach-in door is opened.

FUNCTION for freezers (F1, F2, F3, FS1,

FS2, FS3, FR1, FR2, FR3)

Turns the evaporator fans off and the interior

cabinet light on as the reach-in door is

opened.

SPECIFICATIONS

Push button switch (2 circuit)

CHECK PROCEDURES

1. Check for proper line voltage (+/- 10%).

2. Inspect the switch for proper wiring.

3. Inspect the terminals for clean, tight

connections.

4. Check across the switch terminals with a

voltmeter. Replace the switch if you do

not obtain the results below:

Door

Position

N.O.

Contacts

N.C.

Contacts

Closed 0 line

Open line 0

SELF-CONTAINED REFRIGERATOR

FAN MOTOR WIRING CHANGE

The evaporator fan motor(s) on the units

listed below must be modified.

The evaporator fan(s) must run continuously,

including while the door is open. Otherwise,

frost will form on the evaporator coil.

For models BEFORE serial number:

Model Serial Number

RS1 931080000

RS2 930580000

RS3 930380000

1. Unplug the fan motor wire from terminal

board connection #8.

2. Plug it into terminal board connection #1.

For models AFTER serial number:

Model Serial Number

RS1

RS2 931080000

RS3

1. Disconnect evaporator fan lead #65 from

the terminal board and plug it in to

connection TB30.

2. Disconnect evaporator fan lead #66 from

the terminal board and plug it in to

connection TB31.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

Commenti su questo manuale

Nessun commento