Victory Reach-In Manuale di Servizio Scaricare il pdf (Pagina 88)

Section 8Component Replacement Procedures

8-8

4. Remove the lockrail cover plate.

A. Raise the top front panel cover to

expose the channel assembly holding

the door lock and the thermometer.

B. Remove the lockrail cover screws.

5. Remove the hinge cover plate.

Figure 8-9: Remove Hinge Cover Plate

NOTE: Do not damage the hinge cover plate.

It will be reused.

A. Carefully peel away the two-sided tape

securing the hinge cover plate.

B. Flip the hinge cover plate over.

C. Install the hinge cover plate (using

two-sided tape) over the hole where

the hinge bracket was removed.

6. Install the brackets.

Figure 8-10: Install Brackets

A. Place the hinge brackets on the cabinet

so the flat edge of the brackets face the

outer edge of the cabinets.

B. Install the pivot pin (removed in Step

2) into the top door bracket.

C. Remove the pivot pin from the bottom

door bracket.

Continued on next page...

SV1155

SV1154

FLAT EDGE

OF BRACKET

TO BE FLUSH

WITH SIDE

OF CABINET

1 2 ... 83 84 85 86 87 88 89 90 91 92

Commenti su questo manuale

Nessun commento